CC0 1.0 Universal
3-point clamp, with base and support mount:
All parts can printed in PLA, estimated total time to print all parts is 12 hours. This includes the base and the molds needed to apply silicon rubber to the grip fingers. The grip itself (with needed parts) can be printed in roughly 3hrs. The connector can be printed in 2 hours.
Print parameters: Speed of 100mm/s, 0.1mm layer, and 30% infill.
3 : M8 x 35 bolt
1: M6 threaded rod (1m - cut to needed length)
1: M4 threaded rod (85mm)
1: M4 wing nut
1: M4 nut
1: Standard Support stand rod with M8 threaded bottom
Silicon rubber compound